TAP104J35BRW [KYOCERA AVX]
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 5% +Tol, 5% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED;型号: | TAP104J35BRW |
厂家: | KYOCERA AVX |
描述: | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 5% +Tol, 5% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED |
文件: | 总7页 (文件大小:143K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Section 3: Introduction
Foreword
AVX offers a broad line of solid tantalum capacitors in a wide
range of sizes, styles, and ratings to meet any design needs.
This catalog combines into one source AVX’s leaded tanta-
lum capacitor information from its worldwide tantalum oper-
ations.
AVX has a complete tantalum applications service available
for use by all our customers. With the capability to prototype
and mass produce solid tantalum capacitors in special
configurations, almost any design need can be fulfilled.
And if the customer requirements are outside our standard
testing, AVX will work with you to define and implement a test
or screening plan.
The TAP is rated for use from -55°C to +85°C at rated
voltage and up to +125°C with voltage derating. There
are three preferred wire forms to choose from which are
available on tape and reel, and in bulk for hand insertion.
AVX is determined to become the world leader in tantalum
capacitor technology and has made, and is continuing to
make, significant investments in equipment and research to
reach that end. We believe that the investment has paid off
with the devices shown on the following pages.
Four sizes of molded axials, the TAR series, are also
available. The TAR is fully marked and available on tape and
reel for high speed insertion. The TAA is a hermetically sealed
series also with four case sizes available.
Dipped Radial Capacitors
SOLID TANTALUM RESIN DIPPED
SERIES TAP
The TAP resin dipped series of miniature tantalum capacitors
is available for individual needs in both commercial and
professional applications. From computers to automotive to
industrial, AVX has a dipped radial for almost any application.
Tantalum
Graphite
Resin encapsulation
Tantalum wire
Terminal Wire
Silver
Solder
Manganese
dioxide
Tantalum
pentoxide
59
Dipped Radial Capacitors
Wire Form Outline
SOLID TANTALUM RESIN DIPPED TAP
Preferred Wire Forms
D
D
D
Figure 1
Figure 2
Figure 3
2.0(0.08)
max
H1
H
L
H1 + 4 (0.16)
max
+
+
L
S
L
S
S
d
d
2 (0.079)
min
2 (0.079)
min
d
Wire Form C
Wire Form B
Wire Form S
Non-Preferred Wire Forms (Not recommended for new designs)
Figure 4
Figure 5
Figure 6
D
D
D
H1 max
+0.118
(3.0)
H + 3.8 (0.15)
max
H
+
0.079 (2)
min
L
L
1.10 +0.25
L
-0.10
S
(0.4 +0.010
)
S
-0.004
d
d
S
Wire Form F
Wire Form D
Wire Form G
DIMENSIONS
millimeters (inches)
Packaging
Wire Form
Figure
Case Size
L (see note 1)
S
d
Suffixes Available*
Preferred Wire Forms
CCS Bulk
16.0±±.00
5.00±1.00
0.50±0.05
C
B
S
Figure 1
Figure 2
Figure 3
A - R*
A - J*
A - J*
CRW Tape/Reel
(0.630±0.160)
(0.200±0.0±0)
(0.020±0.002)
CRS Tape/Ammo
16.0±±.00
(0.630±0.160)
5.00±1.00
(0.200±0.0±0)
0.50±0.05
(0.020±0.002)
BRW Tape/Reel
BRS Tape/Ammo
SCS Bulk
SRW Tape/Reel
SRS Tape/Ammo
16.0±±.00
(0.630±0.160)
2.50±0.50
(0.100±0.020)
0.50±0.05
(0.020±0.002)
Non-Preferred Wire Forms (Not recommended for new designs)
3.90±0.ꢀ5
5.00±0.50
0.50±0.05
F
Figure ±
Figure 5
Figure 6
A - R
FCS
Bulk
(0.155±0.030)
(0.200±0.020)
(0.020±0.002)
DCS Bulk
16.0±±.00
(0.630±0.160)
2.50±0.ꢀ5
(0.100±0.020)
0.50±0.05
(0.020±0.002)
D
A - H*
DTW Tape/Reel
DTS
Tape/Ammo
16.0±±.00
(0.630±0.160)
3.18±0.50
(0.125±0.020)
6.35±1.00
(0.250±0.0±0)
0.50±0.05
(0.020±0.002)
0.50±0.05
(0.020±0.002)
G
H
A - J
A - R
GSB Bulk
HSB Bulk
Similar to
Figure 1
16.0±±.00
(0.630±0.160)
Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information.
(2) For D, H, and H1 dimensions, refer to individual product on following pages.
For case size availability in tape and reel, please refer to pages 64-65.
*
60
Dipped Radial Capacitors
TAP Series
SOLID TANTALUM RESIN DIPPED CAPACITORS
TAP is a professional grade device manufactured with a flame retardant
coating and featuring low leakage current and impedance, very small
physical sizes and exceptional temperature stability. It is designed and
conditioned to operate to +125°C (see page 100 for voltage derating
above 85°C) and is available loose or taped and reeled for auto insertion.
The 15 case sizes with wide capacitance and working voltage ranges
means the TAP can accommodate almost any application.
MAXIMUM CASE DIMENSIONS: millimeters (inches)
Wire
Case
C, F, G, H
H
B, S, D
*H1
D
A
B
C
D
E
8.50 (0.330)
9.00 (0.350)
10.0 (0.390)
10.5 (0.±10)
10.5 (0.±10)
11.5 (0.±50)
11.5 (0.±50)
12.0 (0.±ꢀ0)
13.0 (0.510)
1±.0 (0.550)
1±.0 (0.550)
1±.5 (0.5ꢀ0)
16.0 (0.630)
1ꢀ.0 (0.6ꢀ0)
18.5 (0.ꢀ30)
ꢀ.00 (0.280)
ꢀ.50 (0.300)
8.50 (0.330)
9.00 (0.350)
9.00 (0.350)
10.0 (0.390)
10.0 (0.390)
10.5 (0.±10)
11.5 (0.±50)
12.5 (0.±90)
12.5 (0.±90)
13.0 (0.510)
±.50 (0.180)
±.50 (0.180)
5.00 (0.200)
5.00 (0.200)
5.50 (0.220)
6.00 (0.2±0)
6.50 (0.260)
ꢀ.00 (0.280)
8.00 (0.310)
8.50 (0.330)
9.00 (0.350)
9.00 (0.350)
9.00 (0.350)
10.0 (0.390)
10.0 (0.390)
D
F
G
H
J
K
L
M
N
P
H
R
HOW TO ORDER
TAP
475
M
035
SCS
Type
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
Capacitance Tolerance
K = ±10ꢁ
M = ±20ꢁ
(For J = ±5ꢁ tolerance,
please consult factory)
Rated DC Voltage
Suffix indicating wire form
and packaging
(see page 60)
61
Dipped Radial Capacitors
TAP Series
TECHNICAL SPECIFICATIONS
Technical Data:
All technical data relate to an ambient temperature of +25°C
Capacitance Range:
Capacitance Tolerance:
Rated Voltage DC (VR)
Category Voltage (VC)
Surge Voltage (VS)
0.1µF to 330µF
±20ꢁ% ±10ꢁ (±5ꢁ consult your AVX representative for details)
6.3 10 16 20 25 35 50
ꢀ+85°C:
ꢀ+125°C:
ꢀ+85°C:
±
8
5
6.3 10 13 16 23 33
13 20 26 33 ±6 65
ꢀ+125°C:
9
12 16 21 28 ±0
Temperature Range:
-55°C to +125°C
Environmental Classification:
Dissipation Factor:
55/125/56 (IEC 68-2)
ꢀ0.0± for CR 0.1-1.5µF
ꢀ0.06 for CR 2.2-6.8µF
ꢀ0.08 for CR 10-68µF
ꢀ0.10 for CR 100-330µF
Reliability:
1ꢁ per 1000 hrs. at 85°C with 0.1Ω/V series impedance, 60ꢁ confidence level.
Capacitance Range (letter denotes case code)
Capacitance Rated voltage DC (VR)
µF
Code
10±
6.3V
10V
16V
20V
25V
35V
50V
0.1
0.15 15±
0.22 22±
A
A
A
A
A
A
0.33 33±
0.±ꢀ ±ꢀ±
0.68 68±
A
A
A
A
A
B
1.0
1.5
2.2
105
155
225
A
A
A
A
A
A
A
A
B
C
D
E
A
A
A
3.3
±.ꢀ
6.8
335
±ꢀ5
685
A
A
A
A
A
B
A
B
C
B
C
D
B
C
D
C
E
F
F
G
H
10
15
22
106
156
226
B
C
D
C
D
E
D
E
F
E
F
H
E
F
H
F
H
K
J
K
L
33
±ꢀ
68
336
±ꢀ6
686
E
F
G
F
G
H
F
J
L
J
K
N
J
M
N
M
N
100
150
220
10ꢀ
15ꢀ
22ꢀ
H
K
M
K
N
P
N
N
R
N
330
33ꢀ
P
R
Values outside this standard range may be available on request.
AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.
MARKING
Polarity, capacitance, rated DC voltage, and an "A" (AVX
logo) are laser marked on the capacitor body which is made
of flame retardant gold epoxy resin with a limiting oxygen
index in excess of 30 (ASTM-D-2863).
• Tolerance code:
±20ꢁ = Standard (no marking)
• Polarity
• Capacitance
• Voltage
+
A
10µ
16
±10ꢁ = “K” on reverse side of unit
±5ꢁ = “J” on reverse side of unit
• AVX logo
62
Dipped Radial Capacitors
TAP Series
RATINGS AND PART NUMBER REFERENCE
AVX
Part No.
Case Capacitance
Size µF
DCL
(µA)
Max.
DF
ꢁ
Max.
ESR
Max. (Ω)
@ 100 kHz
AVX
Part No.
Case Capacitance
Size µF
DCL
(µA)
Max.
DF
ꢁ
Max.
ESR
Max. (Ω)
@ 100 kHz
6.3 volt @ 85°C (4 volt @ 125°C)
20 volt @ 85°C (13 volt @ 125°C) continued
TAP 335( )006
A
A
A
B
C
D
E
3.3
±.ꢀ
6.8
10
15
22
33
±ꢀ
68
100
150
220
330
0.5
0.5
0.5
0.5
0.8
1.1
1.ꢀ
2.±
3.±
5.0
ꢀ.6
11.0
16.6
6
6
6
8
8
8
8
8
8
10
10
10
10
13.0
10.0
8.0
6.0
5.0
3.ꢀ
3.0
2.0
1.8
1.6
0.9
0.9
0.ꢀ
TAP 336( )020
J
33
±ꢀ
68
5.2
ꢀ.5
10.8
16.0
8
8
8
1.±
1.2
0.9
0.6
*
*
TAP ±ꢀ5( )006
*
TAP ±ꢀ6( )020
*
K
N
N
TAP 685( )006
*
TAP 686( )020
*
TAP 106( )006
*
TAP 10ꢀ( )020
*
100
10
TAP 156( )006
*
25 volt @ 85°C (16 volt @ 125°C)
TAP 226( )006
*
TAP 336( )006
*
TAP 105( )025
A
A
A
B
C
D
E
1.0
1.5
2.2
3.3
±.ꢀ
6.8
0.5
0.5
0.5
0.6
0.9
1.3
2.0
3.0
±.±
6.6
9.±
13.6
±
±
6
6
6
6
8
8
8
8
8
8
10.0
8.0
6.0
5.0
±.0
3.1
2.5
2.0
1.5
1.2
1.0
0.8
*
TAP ±ꢀ6( )006
*
F
TAP 155( )025
*
TAP 686( )006
*
G
H
K
M
P
TAP 225( )025
*
TAP 10ꢀ( )006
*
TAP 335( )025
*
TAP 15ꢀ( )006
*
TAP ±ꢀ5( )025
*
TAP 22ꢀ( )006
*
TAP 685( )025
*
TAP 33ꢀ( )006
*
TAP 106( )025
*
10
TAP 156( )025
*
F
H
J
M
N
15
22
33
±ꢀ
68
10 volt @ 85°C (6.3 volt @ 125°C)
TAP 226( )025
*
TAP 225( )010
A
A
A
B
C
D
E
2.2
3.3
±.ꢀ
6.8
10
15
22
33
±ꢀ
68
100
150
220
330
0.5
0.5
0.5
0.5
0.8
1.2
1.ꢀ
2.6
3.ꢀ
5.±
8.0
12.0
1ꢀ.6
20.0
6
6
6
6
8
8
8
8
8
13.0
10.0
8.0
6.0
5.0
3.ꢀ
2.ꢀ
2.1
1.ꢀ
1.3
1.0
0.8
0.6
0.5
TAP 336( )025
*
*
TAP 335( )010
*
TAP ±ꢀ6( )025
*
TAP ±ꢀ5( )010
*
TAP 686( )025
*
TAP 685( )010
*
35 volt @ 85°C (23 volt @ 125°C)
TAP 106( )010
*
TAP 156( )010
*
TAP 10±( )035
A
A
A
A
A
A
A
A
B
C
E
F
0.1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.9
1.3
1.9
2.8
±.2
6.1
9.2
10.0
±
±
±
±
±
±
±
±
6
6
6
6
8
8
8
8
8
26.0
21.0
1ꢀ.0
15.0
13.0
10.0
8.0
6.0
5.0
±.0
3.0
2.5
2.0
1.6
1.3
1.0
0.8
*
TAP 226( )010
*
TAP 15±( )035
*
0.15
0.22
0.33
0.±ꢀ
0.68
1.0
1.5
2.2
3.3
±.ꢀ
TAP 336( )010
*
F
TAP 22±( )035
*
TAP ±ꢀ6( )010
*
G
H
K
N
P
R
TAP 33±( )035
*
TAP 686( )010
*
8
TAP ±ꢀ±( )035
*
TAP 10ꢀ( )010
*
10
10
10
10
TAP 68±( )035
*
TAP 15ꢀ( )010
*
TAP 105( )035
*
TAP 22ꢀ( )010
*
TAP 155( )035
*
TAP 33ꢀ( )010
*
TAP 225( )035
*
TAP 335( )035
*
16 volt @ 85°C (10 volt @ 125°C)
TAP ±ꢀ5( )035
*
TAP 155( )016
A
A
A
B
C
D
E
F
F
J
L
N
N
R
1.5
2.2
3.3
±.ꢀ
6.8
10
15
22
33
±ꢀ
68
100
150
220
0.5
0.5
0.5
0.6
0.8
1.2
1.9
2.8
±.2
6.0
8.ꢀ
12.8
19.2
20.0
±
6
6
6
6
8
8
8
8
8
8
10
10
10
10.0
8.0
6.0
5.0
±.0
3.2
2.5
2.0
1.6
1.3
1.0
0.8
0.6
0.5
TAP 685( )035
*
6.8
10
*
TAP 225( )016
*
TAP 106( )035
*
F
TAP 335( )016
*
TAP 156( )035
*
H
K
M
N
15
22
33
±ꢀ
TAP ±ꢀ5( )016
*
TAP 226( )035
*
TAP 685( )016
*
TAP 336( )035
*
TAP 106( )016
*
TAP ±ꢀ6( )035
*
TAP 156( )016
*
50 volt @ 85°C (33 volt @ 125°C)
TAP 226( )016
*
TAP 336( )016
*
TAP 10±( )050
A
A
A
A
A
B
C
D
E
F
0.1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.8
1.3
1.8
2.ꢀ
±.0
6.0
8.8
±
±
±
±
±
±
±
±
6
6
6
6
8
8
8
26.0
21.0
1ꢀ.0
15.0
13.0
10.0
8.0
6.0
3.5
3.0
2.5
*
TAP ±ꢀ6( )016
*
TAP 15±( )050
*
0.15
0.22
0.33
0.±ꢀ
0.68
1.0
1.5
2.2
3.3
±.ꢀ
TAP 686( )016
*
TAP 22±( )050
*
TAP 10ꢀ( )016
*
TAP 33±( )050
*
TAP 15ꢀ( )016
*
TAP ±ꢀ±( )050
*
TAP 22ꢀ( )016
*
TAP 68±( )050
*
TAP 105( )050
*
20 volt @ 85°C (13 volt @ 125°C)
TAP 155( )050
*
TAP 105( )020
A
A
A
B
C
D
E
F
1.0
1.5
2.2
3.3
±.ꢀ
6.8
10
15
22
0.5
0.5
0.5
0.5
0.ꢀ
1.0
1.6
2.±
3.5
±
±
6
6
6
6
8
8
8
10.0
9.0
ꢀ.0
5.5
±.5
3.6
2.9
2.3
1.8
TAP 225( )050
*
*
TAP 155( )020
*
TAP 335( )050
*
TAP 225( )020
*
TAP ±ꢀ5( )050
*
G
H
J
K
L
TAP 335( )020
*
TAP 685( )050
*
6.8
10
15
22
2.0
1.6
1.2
1.0
TAP ±ꢀ5( )020
*
TAP 106( )050
*
TAP 685( )020
*
TAP 156( )050
*
TAP 106( )020
*
TAP 226( )050
*
TAP 156( )020
*
(*) Insert capacitance tolerance code% M for ±20ꢁ, K for ±10ꢁ and J for ±5ꢁ
TAP 226( )020
*
H
NOTE: Voltage ratings are minimum values. AVX reserves the right to supply high-
er voltage ratings in the same case size.
63
Dipped Radial Capacitors
Tape and Reel Packaging
SOLID TANTALUM RESIN DIPPED TAP
TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION
TAP types are all offered on radial tape, in reel or ‘ammo’
pack format for use on high speed radial automatic insertion
equipment, or preforming machines.
The tape format is compatible with EIA ±68A standard for
component taping set out by major manufacturers of radial
automatic insertion equipment.
TAP – available in three formats. See page 64 for dimensions.
P2
ꢁP
ꢁh
‘B’ wires for normal automatic insertion on
5mm pitch.
H3
H3
H3
W2
W1
d
BRW suffix for reel
BRS suffix for ‘ammo’ pack
H
L
H1
W
Available in case sizes A - J
S
P
D
P1
T
P2
ꢁP
ꢁh
‘C’ wires for preforming.
W2
W1
CRW suffix for reel
CRS suffix for ‘ammo’ pack
d
H
L
H1
W
Available in case sizes A - R
S
P
D
P1
T
P2
ꢁP
ꢁh
‘S’ and ‘D’ wire for special applications,
automatic insertion on 2.5mm pitch.
W2
W1
d
SRW, DTW suffix for reel
SRS, DTS suffix for ‘ammo’ pack
Available in case sizes A - J
H2
L
H1
W
S
P
D
T
P1
S wire
64
Dipped Radial Capacitors
Tape and Reel Packaging
SOLID TANTALUM RESIN DIPPED TAP
DIMENSIONS:
Description
millimeters (inches)
Dimension
REEL CONFIGURATION AND
Code
DIMENSIONS:
millimeters (inches)
Feed hole pitch
P
12.ꢀ ± 0.30 (0.500 ± 0.010)
Hole center to lead
P1 3.85 ± 0.ꢀ0 (0.150 ± 0.030)
to be measured at bottom
of clench
Diameter 30
(1.18) max.
5.05 ± 1.00 (0.200 ± 0.0±0)
for S wire
Hole center to component center P2 6.35 ± 0.±0 (0.250 ± 0.020)
Change in pitch
Lead diameter
∆p ± 1.00 (± 0.0±0)
53 (2.09) max.
45 (1.77) max.
40 (1.57) min.
d
S
0.50 ± 0.05 (0.020 ± 0.003)
See wire form table
Lead spacing
80
(3.15)
Component alignment
Feed hole diameter
Tape width
∆h 0 ± 2.00 (0 ± 0.080)
360 (14.17) max.
D
±.00 ± 0.20 (0.150 ± 0.008)
Manufactured from cardboard with plastic hub.
W
18.0 + 1.00 (0.ꢀ00 + 0.0±0)
- 0.50
- 0.020)
cardboard with plastic hub.
Hold down tape width
Hold down tape position
Lead wire clench height
W1 6.00 (0.2±0) min.
W2 1.00 (0.0±0) max.
H
16.0 ± 0.50 (0.630 ± 0.020)
19.0 ± 1.00 (0.ꢀ50 ± 0.0±0)
on request
Hole position
H1 9.00 ± 0.50 (0.350 ± 0.020)
H2 18.0 (0.ꢀ00) min. (S wire only)
H3 32.25 (1.300) max.
Base of component height
Component height
Length of snipped lead
Total tape thickness
L
T
11.0 (0.±30) max.
0.ꢀ0 ± 0.20 (0.030 ± 0.001)
Holding tape outside. Positive terminal leading.
Carrying card
0.50 ± 0.10 (0.020 ± 0.005)
PACKAGING QUANTITIES
For bulk products
For ‘Ammo’ pack
For Reels
Style
Case code
A, B, C, D
E, F, G
No. of pieces
3000
Style
Case code
A to H
No. of pieces
1000
Style
Case code
No. of pieces
1500
A
TAP
TAP
2500
J to L
500
B, C, D
1250
TAP
H, J
2000
M to R
100
E, F
1000
K, L, M, N, P, R
1000
G, H, J
ꢀ50
K, L, M, N, P, R
500
AMMO PACK DIMENSIONS
GENERAL NOTES
millimeters (inches) max.
Resin dipped tantalum capacitors are only available taped in
the range of case codes and in the modular quantities by
case code as indicated.
Height 360 (1±.1ꢀ), width 360 (1±.1ꢀ), thickness 60 (2.36)
Packaging quantities on tape may vary by ±1ꢁ.
65
相关型号:
TAP104K035BCS
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KYOCERA AVX
TAP104K035BRW
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, 1818, RADIAL LEADED
KYOCERA AVX
TAP104K035GSB
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, 1818, RADIAL LEADED
KYOCERA AVX
TAP104K035HSB
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, 1818, RADIAL LEADED
KYOCERA AVX
©2020 ICPDF网 联系我们和版权申明